Events

Content from TMAC: Geometric Dimensioning and Tolerancing (GD&T) Fundamentals Webinar

March 16, 2021 - Share on LinkedIn Share on Facebook Share on Twitter

Register Here!

Dates:          March 16-18, 2021
Time:            9:00 am to Noon, 12:30 pm to 4:00 pm CST,
Where:         On-line (at your computer)
Cost:            $895 per participant before March 3; $1,195 until registration closes EOB March 9, 2020.

                    Includes shipping within the US; international shipping also available at higher rates.

Includes:      350+ page hard copy textbook updated to include ASME Y14.5-2018 revisions is sent to each participant; select the appropriate option to the right for US or international shipment.

                    Pre/post assessment

                    Various references, GD&T inspection calculators, and other tolerancing tools

                    Certificate of Completion

                    *Customized exercises based on participant drawings, views, or examples

                    On-going email and telephone support from ITR available.

                    Seating is limited; register promptly.

                    Registration ends when available seats are filled and not later than March 9, 2021.
                    
Inquiries:      Dan Bauer at (915) 867-4500 or email dan.bauer@itr-sa.com.

 

GD&T is an international symbolic language used on mechanical engineering drawings to supplement and optimize traditional coordinate dimensioning and tolerancing.  Dan Bauer from ITR holds Senior GD&T Certification from ASME and will be teaching GD&T Fundamentals including the following:

  • What is it, who uses it, and why
  • Metric and Inch dimensioning and tolerancing conventions
  • Major Elements of GD&T
  • Key elements and major changes to the last three revisions to Y14.5 and ISO 1101
  • Aerospace and automotive specific standards, requirements, and exceptions to Y14.5
  • How to Interpret Feature Control Frames, Datums, and Basic Dimensions
  • Inspection and measurement options and strategies for of each of the 14 GD&T Symbols
  • Advantages and Disadvantages of GD&T for Design, Manufacturing, and Inspection
  • Basic Steps for Applying Coordinate and Geometric Dimensioning and Tolerancing to New Designs or Drawings
  • Customized application and interpretation exercises based on Participant Drawings*

 

This program is appropriate for all management, design, manufacturing, quality, inspection, purchasing personnel to understand the benefits and proper application and interpretation of GD&T.

 

*Participants are encouraged to submit drawings (with or without GD&T) to the instructor before and during the seminar for review during the presentation.


Back to All Events